Warranty
COMMITED TO QUALITY
Learn more about our policies...

Hoist Lazer Series

Description

Lazer Series
The Lazer Series offers the same combination of strength, maneuverability and comfort as the Titan and FKS series, but on an electric platform. Operating in the harshest indoor applications, these battery-powered cushion tire lift trucks have zero emissions and offer a wide array of mast and attachment configurations.
Designed for indoor applications, the Lazer Series is ideal for a variety of industries, including paper, steel, beverage and automotive. Whether you’re stacking large paper rolls or moving metal coils inside a railcar, the Lazer Series provides the strength and maneuverability you need to maximize productivity.
As with all Hoist Liftruck equipment, the Lazer Series is 100% made in the USA. More than 75% of each truck is manufactured in-house at our Midwest factory with the remaining components sourced from reputable U.S. companies.
Capacity Range
15,000 – 40,000 lbs. (7 – 18 tonnes)
Wheelbase
75 – 92 in. (1,900– 2,300 mm)
Load Center
24 – 36 in. (900 – 1,200 mm) The Lazer Series is designed with a standard two-stage, high-visibility mast, low-profile carriage and short counterweight to provide the operator with unobstructed views in all directions.
For ultimate versatility and efficiency, equip your Lazer Series with our new Quick-Change System. This optional feature allows crews to switch from forks to a coil ram in minutes without removing the pin.
Pin-mount, machine-contoured forks (high or low position)
Welded-nested channels with lift cylinders secured directly behind mast rails
Lift chain and optional attachment hosing located inside inner mast rail
Main and side thrust rollers are impact-resistant and designed to reduce friction; rollers are properly lubricated and sealed
Greaseable mast pivots constructed with wear-resistant bronze bushings and hardened steel pins
Safety valves built into base of lift cylinders for controlled lowering in the event of a hose failure
Chrome-plated rods on cylinders for easy seal replacement
Optional Equipment
Quick-Change System
Three-stage or Free-Lift mast
Side-shifting or independent fork positioner
Lift/tilt accumulator
Extended height and width carriages
Quick-disconnect hydraulic connections
Additional work lights
Slope piler
Rotator
Coil grab hooks
Coil ram with side-shift
Integral coil ram
Fork-mounted container handler
Forging/foundry billet grab
Kissing coil radiused forks
Lumber forks
Magnets
Pallet forks or multi-pallet handler
Oil line reel lifting
Pipe hold-down clamp The electric Lazer Series offers an eco-friendly alternative to internal combustion cushion tire forklifts, producing zero emissions. The Lazer Series also features a load sensing hydraulic system, which offer not only power, but also increased productivity and efficiency.
17.7HP drive motor
Battery compartment accommodates 72- or 80-volt battery; polyurethane slides and roller options allow quick battery installation and removal
Hydraulic pump motor features load-sensing hydraulic system with variable pumps adjust oil flow accordingly to provide quicker lifting cycles
Transistor control monitors drive and pump motors, travel speed, hydraulic functions and battery life
Low battery lift interrupt protects electrical system and motors from low voltage damage
12-plate modulation for smooth shifting and added durability
Tilt-lock valve with counterbalance to prevent mast drift
Hydraulic multi-gauge provides quick and easy pressure readings with a twist of the dial; eliminates the need to tap into hydraulic lines
Standard 12-volt electrical system
Color-coded electrical wires enclosed with split-tubing wire loom wrap using sealed weather pack connectors
Electrical system controls LED headlights, tail lights, turn signals, backup lights, marker lights, brake lights and LED amber strobe light; lights are completely sealed and last approximately 10,000 hours Hoist Liftruck’s line of BIG TRUCKS starts with a strong foundation. Anchoring the Lazer Series is the 100%-welded steel chassis, which boasts heavy steel cross supports that distribute weight evenly throughout the truck for added durability. Integrated lifting points also allow for safe handling and transport.
Did you know that many other lift truck manufacturers lose as much as 2,500 lbs. (1 ton) on the rated capacity when adding a feature such as a side-shifting fork positioner? Not on a Lazer Series. You receive the full rated capacity even if you add a feature such as a side-shifting fork positioner.
AxleTech Drive Axle
Planetary drive axle rated for durability in high-capacity, off-road applications
Force-cooled outboard wet disc actuated brakes reduces premature wear, extending life of brakes
Brakes can be serviced through the wheel ends without removing entire drive axle
Drive axle is bolted and dowel-pinned in the chassis
Industrial Steer Axle
Thick top plate on welded beam steer axle provides added strength and durability
Highly maneuverable in tight areas
Dual-action bolt on cylinder is protected by heavy steel support beams and provides effortless power steering
Lower maintenance costs due to minimal amount of moving parts
Easy-access lubrication points
Sealed tapered roller bearings
High-impact greaseable composite trunnions
Paint/Finish
Two-part rust-inhibiting polyurethane base coat and two-part polyurethane top coat for corrosion protection
Majority of components are powder-coated, which is up to 10 times thicker than traditional spray paint resulting in greater scratch and chip resistance
Environmentally friendly; produces virtually no volatile organic compounds (VOCs) We understand the importance of being able to service your lift truck easily and efficiently. Whether it’s routine maintenance or on-site service call, the Lazer Series is designed to allow easy access to all integral components to minimize downtime. Easy-lift hoods, panels and doors give technicians immediate access to vital service points. The innovative hydraulic multi-gauge provides quick and easy pressure readings with a simple twist of the dial, eliminating the need to tap into individual hydraulic lines.
Every component on the Lazer Series is sourced from a reputable U.S. vendor or manufactured by Hoist Liftruck. Utilizing the same domestic components throughout our product lines provides you with not only cost savings, but also rapid parts availability.
The Lazer Series comes with a standard 12-month/2,000-hour warranty (parts and labor) with optional extended warranties up to 12,000 hours.

Specifications
CAPACITY RANGE: 15,000 – 40,000 lbs. (7 – 18 tonnes)
WHEELBASE: 75 – 92 in. (1,900– 2,300 mm)
LOAD CENTER: 24 – 36 in. (900 – 1,200 mm)
Request A Quote
or just call (888) 848-4290
Check if you want to learn about promotions, sales and special events

60 years of continous service
Exellent customer satisfaction
Highly customizable services
Cutting edge GPS fleet tracking technology